Get a Quote Tomorrow
NEW! EZ-RF Reduced Friction Coating
Run cable and wire faster with EZ-RF. This coating helps decrease pulling tension, reduces friction up 85%* and helps to ease in installing wire and cable in conduit or raceway. More
Medium Voltage Wire, MV-90 PRIMARY UD
-
Series UList Item 1
TR-XLPE/CN/LLDPE, MV-90 Type Primary UD, 15kV–35kV (Aluminum Conductors)
Series E9 Medium Voltage Primary Underground Distribution (UD) cables consist of an Aluminum (filled or unfilled) conductor, covered with tree-retardant Cross-linked polyethylene (TR-XLPE), a concentric neutral of helically applied copper wires, and a linear low-density polyethylene (LLDPE) jacket with 3 extruded red stripes.
-
Series UList Item 2
TR-XLPE/CN/LLDPE, MV-90 Type Primary UD, 15kV–35kV (Aluminum Solid Conductor)
Series E9 The Medium Voltage Primary Underground Distribution (UD) cables consist of an Aluminum Solid conductor, covered with tree-retardant Cross-linked polyethylene (TR-XLPE), a concentric neutral of helically applied copper wires, and a linear low-density polyethylene (LLDPE) jacket with 3 extruded red stripes.
-
Series U
EPR/CN/LLDPE, MV-90 Type Primary UD, 15kV–35kV (Aluminum Conductors)
Series E9 Medium Voltage Primary Underground Distribution (UD) cables consist of an Aluminum (filled or unfilled) conductor, covered with ethylene propylene rubber (EPR), a concentric neutral of helically applied copper wires, and a linear low-density polyethylene (LLDPE) jacket with 3 extruded red stripes.
-
Series U
EPR/CN/LLDPE, MV-90 Type Primary UD, 15kV–35kV (Aluminum Solid Conductor)
Series E9 Medium Voltage Primary Underground Distribution (UD) cables consist of an Aluminum Solid conductor, covered with ethylene propylene rubber (EPR), a concentric neutral of helically applied copper wires, and a linear low-density polyethylene (LLDPE) jacket with 3 extruded red stripes.
-
Series U
EPR/CN/LLDPE, MV-90 Type Primary UD, 15kV–35kV (Copper Conductors)
Series E9 Medium Voltage Primary Underground Distribution (UD) cables consist of a Copper (filled or unfilled) conductor, covered with ethylene propylene rubber (EPR), a concentric neutral of helically applied copper wires, and a linear low-density polyethylene (LLDPE) jacket with 3 extruded red stripes.
-
Product Specification Sheets
For a full list of our product spec sheets, please click here.
Why Choose LS Cable & System USA
LS SureClean™ Isolator Technology
Reduce excessive particulate contamination and help cables maintain their integrity for a much longer life cycle.
Isolator technology has demonstrated its value as a proven improvement on existing technologies within industries where cleanliness standards are also critical such as pharmaceutical and food preparation, LS Cable & System USA has determined the use of isolator technology for the material handling of MV, HV and EHV cable provides the same advantages as other industries.
The isolator box has been certified as ISO 5 (Class 100). There are 100 times fewer particles than the standard ISO 7 (Class 10,000) cleanroom being used today. ISO 7 class of clean room will have 2,930 particles >= 5 µm per cubic meter.
